NASA Mars Rover 3D model

Hi!
Before explaining, congratulations on the successful Mars landing of NASA's "Insight"!



The 3D modeling we will introduce today is also related to nasa.

It is a concept car made by parkerbrothersconcepts.



The exact name is unclear because it is a concept. I simply call it the NASA Concept Mars Rover.

The NASA-related rover is currently on display at the Kennedy Space Center in Florida, USA.



These are the pictures I used to refer to when I modeled.
It was difficult to find related pictures than I thought.

We started modeling with SolidWorks 2016.

I thought it took a long time. And looking at the records, I've been working on plans since October 2017.

Let's look at the whole exterior!







Does the overall feel a bit like a batmobile? How about you?

According to the search, the body part is divided into front and back.

The front part is used for the exploration and the rear part is used for the lab.

I did this too :)

I could not find any information clearly about how the rear end is divided. But is not it possible to divide the whole rear side only by this method? I think this.

Also, in the rear laboratory part, there are only two wheels, so I made a supporting part to balance.

Unfortunately, there was no adequate space around the legs, so it was impossible to model and characterize the cylinder.

So realistically, I think it's impossible to support with a cylinder.

Next, I changed the wheel a little bit more.

I brought this picture here.

https://www.facebook.com/pg/ParkerBrothersConcepts

The wheel seems to have a special appearance, but I do not particularly drive it.

Here I wanted to put some fun features.

?

Do you look like a Stainless Steamer?

The principles seem to be similar.

But the fixed parts are opposite.

In addition, it is different in that there is not a crank plate that can support the center shaft without being hindered even if it is impacted externally.

I think it is actually impossible to look like it is actually possible with graphics.

Next inside view.

This is the cockpit of the exploration department.

To be honest, it took a long time and made it simple ...

Still, the display part was expressed as key shot 6 ...

Rear lab part.

This part was also treated with glass.

We plan to make additional modifications later if we have time.

Finally, it is a rendered photo and video.

This photo has been downloaded from the NASA homepage!

Below is the original picture.

It was NASA Mars Rover so far!

+ In addition, we are planning a retrofit modeling of Mars Rover and The Bet in 2019.

Because I am going to change the computer according to the work specifications.

NASA Mars Rover files are available for purchase from the following domains:

https://www.cgtrader.com/3d-models/vehicle/sci-fi/nasa-mars-rover-concept

https://www.turbosquid.com/3d-models/3d-mars-nasa-rover-model-1352999

Thank you!

+ For inquiries, please contact house336@gmail.com.

Mercedes Benz 'Biome'

Today I introduce concept car 3D modeling, which I felt very fresh in my life.


Mercedes-Benz Biome.
3D modeling with Solidworks 2016, rendered with keyshot 6.
The Biome is the Mercedes Benz 2010 Concept Car, Lee Il Hwan, a Korean designer, took charge.




These are the pictures that I refer to when I made 3D modeling.

There was a lot of unfamiliar parts in the concept car.

So it took some time to collect information.

Fortunately, asphalt 8 included a Biome in a racing game, so I was able to understand the shape smoothly.





This 3D model has three representative Characteristic.

First, because the theme is natural, it is a curvy design. That's why I was able to learn more about Solidworks 3D sketching.

However, it is difficult to fully describe the bend. Therefore, there is a slight difference from the original Biome model.

In addition to the curved shape, the shape of the wheel was also fresh.

This is the second feature.

The design of the wheel is the shape of the bell.
I think this is very attractive.

Unfortunately, it is said that it can not actually be driven.

The third feature is the Gull wing Body.

Designer Lee il Hwan came up with a way to move the entire body, not the door, in the Gull wing Door way.

So it was hard to model.

Because the body moves, the rear bumper and the wheels come into contact ...

I think it takes a long time to fix this.

I have no choice so, I was forced to go ahead.

If you remove the body, you will get some unexpected shape.

It is like the bone of a creature.

At first it seemed too difficult to express. So I tried not to work.

However, I thought that I had to create an internal frame as well as a body.

It was difficult ...

Rendering pictures.

Finally, animation, rendering video.

The video below is a 32x image of the production process.

 It is a video that lacks the workability somewhat.

If you have any questions or comments, please leave a comment :)

Mercedes-Benz 'Biome' files are available for purchase in the following domains:

https://www.cgtrader.com/3d-models/car/concept/mercedes-benz-biome

https://www.turbosquid.com/FullPreview/Index.cfm/ID/1165464

Thank you!

THE BAT 3D modeling solidworks2014

Hello!

This time I've tried 3D modeling for "the bat" in a watch The "Dark Knight Rises".

"The bat" were searching on Google.

This is a plastic model of the hot toys(Figures famous).

The size was 1/12. Also There are also a variety of sizes.

Collect this picture was used as a reference model.

It was difficult not knowing the dimensions.

Also this time I made a work movie 32 times faster.

Sore eyes.

I recommend viewing the video driver.

Thus it was produced.

From beginning to end, was working with solidworks2014.

But it was rendering into keyshot 6.

I was making a driving video.

As a result, of three types emerged.

Floating in the air type (take-off) 

Open Doors

Of the land types (Landing) 

And for the first time it has been registered for "the bat" in the modeling site!

https://www.cgtrader.com/preview-3d-print-model/657794

here to modeling will be registered in the future.

Thank you for at the end!

Eiffel Tower 3d modeling

The Eiffel Tower was produced with Solidworks.

I have rendering to the keyshot6.

Download here :^)

https://www.cgtrader.com/free-3d-print-models/art/other/eiffel-tower-c6464456-a3d4-4f5c-a511-3298f639b0d4

Thank you

M1A2 Abrams 3D Modeling

As CATIA and SolidWorks2014 "M1A2 TUSK 2" modeled the plastic model.

 

M1A2 Abrams TUSK is a the Academy plastic model.
In fact, I did not get a lot of assembling was worried a plastic model . But the post was posted. :)

As you can see, open estivation sees in three types.

I chose to "TUSK2" at the top.

It seems easy steps. But was much assembly than the other kind...

I saw the drawings and were frustrated...

Forward is to assemble and assembly modeling...

I forgot to take pictures and taken videos.

I forgot to take pictures and taken videos. So it was shooting at the end.

Fortunately, the above picture is taken in the middle of the process.

The turret half-step, a comparison of the actual plastic model and catia model.

This is just one part of the capture when completed.

apply colored lacquer.

 

I have rendering to the keyshot6.

Finally, it creating exploded views, animations from SolidWorks.
Thank you for at the end!